Use the project description HERE to complete this activity. For a review of the complete rubric used in grading this exercise, click on the Assignments tab, then on the title Excel Project #3. Click o

Excel Project 3 – MS Excel (Summer 2019 ) Use the project description HERE to complete this activity. For a review of the complete rubric used in grading this exercise, click on the Assignments tab, then on the title Excel Project #3. C lick on Show Rubrics if the rubric is not already displayed . Summary Create a Microsoft Excel file with four worksheets that provides extensive use of Excel capabilities for chart ing . The chart s will be copied into a Microsoft Power Point file and the student will develop appropriate finding s and recommendations bas ed on analysis of the data . A large rental car company has two metropolitan locations, one at the airport and another centrally located in downtown. It has been operating since 2015 and each location summarizes its car rental revenue quarterly. Both loca tions rent four classes of cars: economy , premium , hybrid, SUV . Rental revenue is maintained separately for the four classes of rental vehicles. The data for this case resides in the file summer 2019 rentalcars .txt and can be downloaded by clicking on the Assignments tab, then on the data tile name. It is a text file (with the file type .txt). Do not create your own data, you must use the data provided and only the data provided. Default Formatting. All labels, text, and numbers will be Arial 10, T here will be $ and comma and decimal point variations for numeric data, but Arial 10 will be the default font and font size. Step Requirement Comments 1 Open Excel and save a blank workbook with the following name: a. “Student’s Last First Initial Excel Project 3” Example: Smith Jane P Excel Project 3 b. Set Page Layout Orientation to Landscape Use Print Preview to review how the first worksheet would print. 2 Change the name of the worksheet to An alysis by . 3 In the Analysis by worksheet: a. Beginning in Row 1, e nter the four labels in column A (one label per row) in the following order: Name:, Class/Section:, Project:, Date Due: b. Place a blank row between each label. P lease note the colon : after each label. c. Align the labels to the right side in the cell s It may be necessary to ad just the column width so the fou r labe ls are clear ly visible within Column C (not extending into Column D). Format for text in column A: • Arial 10 point • Normal font • Right -align all four labels in the cells 4 In the Analysis by worksheet with all entries in column C : a. Enter the appropriate values for your Name, Class and Section, Project, Date Due across from th e appropriate label in column A. b. Use the formatting in the Comments colu mn (to the right) . It may be necessary to ad just the column width so the fou r labe ls are clear ly visible within Column C (not extending into Column D). Format for text in column C: • Arial 10 point • Bold • Left -align all four values in the cells Step Requirement Comments 5 a. Create four new worksheets: Data, Slide 2, Slide 3 , Filter Analysis . Upon completion, there must be the Analysis by worksheet as well as the four newly created worksheets. b. Delete any other worksheets. 6 After clicking on the blan k cell A1 (to se lect it) in the Data worksh eet, impo rt the text file summer2019 rentalcars.txt into the Data workshee t. The da ta shou ld beg in in Column A, Row 1. It will be ne cessa ry to ch ang e Revenue da ta to Currenc y format ($ and comma (tho usands sepa rators) with NO dec imal po ints, an d to ch ang e NumCars da ta to number format, with NO dec imal po ints, bu t with the comma (tho usa nds se parator). Note: in the Currency format there is NO space between the $ and the first numeric character that follows the $. Thoug h the inten t is to impo rt the text file into the Data worksh eet, sometimes whe n text da ta is impo rted into a worksh eet, a ne w workshee t is crea ted . If this hap pens, de lete the blan k Data worksheet. Then change the name of the ne w worksh eet with the imported da ta as “Data”. Make sure worksheets are n the correct order per Item 5. Format for all data (field names, data text, and data numbers) • Arial 10 point. • Normal font The field names must be in the top row of the worksheet with the data directly under it in rows.

This action may not be necessary as this is part of the Excel table creation process. The data must begin in Column A. . 7 In the Data worksheet: a. Create an Excel table with the r ecently imported data. b. Pick a style with the styles group to format the table (choose a style that shows banded rows, i.e., rows that alternate between 2 colors). c. The style must highlight the field nam es in the firs t row. These are your table headers. d. Ensure NO blank cells are part of the specified data range. e. Ensure that Header Row and Banded Rows are selected in the Table Style Options Group Box. Do NOT check the Total Row. Some adjustment may be necessary to column widths to ensure all field names and all data are readable (not truncated or obscured). 8 In the Data worksheet, a. Sort the entire table by Year (Ascending). b. Delete rows that contain 2 01 6 data as well as 2017 data. Erasing or deleting only the data DOES NOT remove the rows from the Excel table. The resulting table must consist of Row 1 labels followed b y 32 rows of 201 5 data , with NO empty cells or rows within the table. 9 In the Data worksheet: a. Select the entire table (data and headers) using a mouse. b. Copy the table to the Slide 2 , Slide 3, and Filter Analysis worksheets. For the Filter Analysis worksheet use Paste | Values so that the values are copied but not the formatting of the Excel table. c. The upper left -hand corner of the header/data must be in cell A1 on Slide 2 and Slide 3 d. Format specifications from Data worksheet are required for these three worksheets. Adjust columns widths if necessary to ensure all data and field Step Requirement Comments names are readable. 10 In the Slide 2 worksheet, based solely on the 201 5 data: a. Create a Pivot Table that displays the total number of car rentals for each car class in rows and the total number of car rentals for each of the four quarters in columns for 201 5. A grand total for the total number of rentals (NumCar) must also be displayed. The column labels must be the the four quarters and the row labels must be the four car classes . b. Place the pivot table beginning in row 1 two columns to the right of the data . Ensure that the formatting is as listed in the Comments column. c. Create a Pivot Table that displays the total number of car rentals for each location in two rows and the total number of car rentals for each of the four quarters in columns for 201 5. A grand total for the total number of rentals must also be displayed. The column labels must be the four quarters and the row labels must be the two locations . Place this pivot table two rows below the upper pivot table and left aligned with the upper pivot table. Ensure that the formatting is as listed in the Comments column. After the both pivot tables are created and appropriately formatted, adjust the column widths as necessary to preclude data and title and label truncation. Some of the columns will appear disproportionally large in the Excel table to preclude data and title truncation in the two pivot tables. Format (for both pivot tables): • Number format with comma separators (for thousands) • No deci mal places • Arial 10 point • Normal • Right -align the Q1 through Q4 as well as Grand Total column header labels to the right of the four quarter labels in both pivot tables 11 In the Slide 2 worksheet, based solely on the 201 5 data: a. Usi ng the pivot table created in Step 10 a, create a bar or column chart that displays the number of car rentals by car class for the four 201 5 quarters. Both car types and quarters must be clearly visible. b. Add a title that reflects the information presented by the chart. c. Position the top of the chart two rows below the lower pivot table and left -aligned. Use this same type of bar or column chart for the remaining three chart s to be created. d. Usi ng the pivot table created in 10 c , create a bar or column chart that displays the number of car rentals by location for the four 201 5 quarters. Both locations and quarters must be clearly visible. e. Add a title that reflects the information presented by the chart . f. Left -align this chart with the left side of the first chart and below it. The same type of bar or column chart must be used throughout this project. The chart s must allow a viewer to determine approximate numbe r or car rental by car class (first chart) and number of car rentals by location (second chart) The top chart must have no more than sixteen bars or columns. The bottom chart must have no more than eight bars or columns. ALL FOUR (Slide 2 as well as Slide 3) charts must have the same “format.” 12 In the Slide 3 worksheet, based solely on the 201 5 data: a. Create a Pivot Table that displays the total revenue for each car class in rows and the total revenue for each of the four quarters in columns for 201 5. A grand total for the total revenue must also be displayed. The column labels must be the four quarters Format (for both pivot tables): • Currency ($) with comma separators (for thousands) and Step Requirement Comments and the row labels must be the four car classes . b. Place the pivot table in the first row and two columns to the right of the data . c. Create a Pivot Table that must display the total revenue for each quarter in columns and for each of the two locations in rows for 201 5. A grand total for the total revenue must also be displayed. The column labels must be the four quarters and the row labels must be the two locations . d. Place this pivot table two rows below the pivot (step 12a) table begin ning at the left border of column A. After the both pivot tables are created and appropriately formatted, adjust the column widths as necessary to preclude data and title and label truncation. Some of the columns will appear disproportionally large in the Excel table to preclude data and title truncation in the two pivot tables. no space between the $ and the first number • No decimal places • Arial 10 point Normal • Right -align the Q1 through Q4 and Grand Total column labels that follow the four Quarter labels in both pivot tables 13 In the Slide 3 worksheet, based solely on the 201 5 data: a. Usi ng the pivot table created in Step 12 a, create a bar or column chart that displays the revenue from car rentals by car class for the four 201 5 quarters. Ensure both car types and quarters are clearly visible. b. Add a title that reflects the information presented by the chart. c. Position the top of the chart two rows below and left -aligned with the bottom pivot table. The same type of bar chart must be used throughout this project. d. Using the pivot table created in Step 12 c, create a bar or column chart that displays the revenue from car rentals by location for the four 20 15 quarters. Ensure both locations and quarters are clearly visible. e. Add a title that reflects the information presented by the chart. f. Left -align this chart with the left side of the first chart and below it. The same type of bar chart must be used throughout this project. The chart s must allow a viewer to determine approximate numbe r or car rental by car class (first chart) and number of car rentals by location (second chart) The top chart must have no more than sixteen bars or columns. The bottom chart must have no more than eight bars or columns. ALL FOUR (Slide 2 as well as Slide 3) charts must have the same “format.” 14 In the Filter Analysis worksheet, if necessary, remove all formatting from the Excel Table so that it is one row of labels in Row 1 followed by 32 rows of of 2015 rental car data. Turn on filtering for all 33 rows. 15 In the Filter Analysis worksheet: a. Select Economy ONLY and Quarter 1 ONLY in their respective columns. b. In row 34, the next blank row after the data, in the revenue and number of cars columns, calculate the sum of that column by adding the addresses of the cells resulting from the filter action (should be two values for Rvenue and two values for NumCars) . c. Format the two values to match the data above in the particular respective column. The two values should match the values from the previously created pivot ta bles. Step Requirement Comments 16 a. Open a new, blank Power Point presentation file. b. Save the Presentation using the following name: “Student’s Last First Initial Presentation” Example: Smith Jane P Presentation 17 Slides are NOT Microsoft W ord documents viewed horizontally. Be brief. Full sentences should not be used on the slide . Bullet points only. Blank space in a slide enhances the viewer experience and contributes to readability. (Speaker notes should be complete sentences.) Slide 1: a. Select an appropriate Design to maintain a consistent look and feel for all slides in the presentation. Blank slides with text are not acceptable. b. This is your Title Slide. c. Select an appropriate title and subtitle layout that clearly conveys the purpose of your presentation. d. Name, Class/Section, and Date Due must be displayed. No speaker notes required . Remember, the title on your slide must convey what the presentation is about. Your Name, Class/Section, and Date Due can be used in the subtitle area. 18 Slide 2: a. Title this slide "Number of Cars Rented in 201 5" b. Add two charts created in the Slide 2 worksheet of the Excel file c. The charts must be the same type and equal size and be symmetri cally placed on the slide. d. A bullet or two of explanation of the charts may be included, but is not required if charts are self -explanatory. e. Use the speaker notes feature to help you discuss the bullet points and the chart s (four complete sentences minimum ). Ensure that there are no grammar or spelling errors on your chart and in your speaker notes. 19 Slide 3: a. Title this slide "Car Rental Revenue in 201 5" b. Add two charts, created in the Slide 3 worksheet of the Excel file. c. The charts must be the same type and equal size and be symmetrically placed on the slide. d. A bullet or two explanation of the charts may be included, but is not required if charts are self -explanatory. e. Use the speaker notes fea ture to help you discuss the bullet points and the chart s (four complete sentences minimum ). Ensure that there are no grammar or spelling errors on your chart and in your speaker notes. 20 Slide 4: a. Title this slide "And in Conclusion….." b. W rite and add two major bullets, one for findi ngs and one for recommendations. c. There must be a minimum of one finding based on slide 2 and one finding based on slide 3. Findings are facts that can be deduced by analyzing the charts. W hat happened? Trends? Observa tions? d. There must be a minimum of one recommendation based on slide 2 and one recommendation based on slide 3. Recommendations are strategies or suggestions to improve or enhance the business based on the findings above. e. Use the speaker notes feature to help you discuss the Ensure that there are no grammar or spelling errors on your chart and in your speaker notes. Step Requirement Comments findings and recommendations ( four complete sentences minimum ). 21 Add a relevant graphic that enhances the recommendations and conclusions on slide 4 . If a photo is used, be sure to cite the source. The source citation must be no larger than Font size of 6, so it does not distract from the content of the slide. 22 Create a footer for your name and automated Slide Numbers that appears on all slides except the Title Slide The page number must be on the right side of the slides IF the theme selected allows. Otherwise let the theme determine the position of the page numb er Ensure that your name does appear on every slide in the footer , but the page numbers start on slide #2. This will involve slightly different steps to accomplish both Depending upon the theme you have chosen, the page number or your name may not appear in the lower p ortion of the slide. That is ok, as long as both appear somewhere on the slides. 23 Apply a transition scheme to all slides . One transition scheme may be used OR different schemes for different slides 24 Apply an animation on at least one slide. The animation may be applied to text or a graphic . Be sure you submit BOTH the Excel file and the PowerPoint file in the appropriate Assignment folder (Excel Project #3) .