strength lab report, I attached all the info needed and file that i started with the lab report already

strength lab report, I attached all the info needed and file that i started with the lab report already 1

CVE 310 Strength of Materials Lab

Spring 2023

Section: 1

Experiment 3

Mechanical Properties of Metal

Submitted to –

Anil Parmar

Prepared by –

Group 1:

Date Performed:

2/14/23

Date Submitted:

2/21/23

Abstract:

Introduction:

Procedure:

1. Measure the diameter and length of the aluminum rod

2. Record the results

3. Using a tension test the axial load of the steel rod will be tested

4. The results of the strain are recorded and compared to the original strain

5. These results are used to calculate the stress and strain of the steel

In step three, a tensile loading machine is used to stretch the Aluminum. The Aluminum is placed inside the machine and is stretched to failure to determine the max load. It is important to know the max load of the material for any given project.

Results & Discussion:

T3 2024:

strength lab report, I attached all the info needed and file that i started with the lab report already 2

Conclusion: