Hi, need to submit a 1550 words paper on the topic Comfort Conditions Inside the Buildings: the Collection of Engineering Systems.

Hi, need to submit a 1550 words paper on the topic Comfort Conditions Inside the Buildings: the Collection of Engineering Systems. All drainage works must be prepared and laid as per the prevailing building regulation rules (ADS Inc, 2008). A minimum diameter of 150 mm must be adopted for all the drainage pipe connections involving more than 10 user locations. Grease separator must be included in all the drains connected to hotels or any cooking related centers. Addition of drains to the existing network must be through prefabricated units to avoid the use of saddles (ADS Inc, 2008).&nbsp. Appropriate precautions to limit the effect of surcharging drains must be considered. In the case of new development projects, the necessary allowance for the expansion of both private and public drainage systems must be provided. Necessary construction precautions must be taken if the drains would have to pass through the walls (ADS Inc, 2008). In such situations, either Rocker pipes or filling compressible materials around the drains are the measures adopted. Finally, the rodent control measures like sealed inspection chambers, intercepting traps and solid gully covers are also very essential (ADS Inc, 2008).&nbsp.All drainage works must be prepared and laid as per the prevailing building regulation rules (ADS Inc, 2008). A minimum diameter of 150 mm must be adopted for all the drainage pipe connections involving more than 10 user locations. Grease separator must be included in all the drains connected to hotels or any cooking related centers. Addition of drains to the existing network must be through prefabricated units to avoid the use of saddles (ADS Inc, 2008).&nbsp. Appropriate precautions to limit the effect of surcharging drains must be considered. In the case of new development projects, the necessary allowance for the expansion of both private and public drainage systems must be provided. Necessary construction precautions must be taken if the drains would have to pass through the walls (ADS Inc, 2008). In such situations, either Rocker pipes or filling compressible materials around the drains are the measures adopted. Finally, the rodent control measures like sealed inspection chambers, intercepting traps and solid gully covers are also very essential (ADS Inc, 2008).&nbsp. The rainwater collected is not allowed to be discharged to the existing sewer lines. In the case of unavoidable situations, the order of priority of rainwater discharge is initially to a soakaway then to a watercourse and finally to sewer (ADS Inc, 2008). The soakaways proposed for such situations must be designed based on the data on the rainfall intensity, soil porosity tests, and storage capacity. The details of swales, filters and the detention ponds may also be used. The modification to the roof area and gutter sizes besides providing symphonic and eavesdrop system need to be followed as per the guidelines (ADS Inc, 2008). The locations that have more chance to produce the contaminated drainage must be separately handled. The areas affected by the petrol spill must try to direct all drainage to an oil interceptor before further segmentation. Inorder ensure sustainable use of resources the rainwater is put into different types of reuse operations. It is estimated that the roof area of at least 2000 sq ft would be able to gather at least 1246 gallons during 1-inch rainfall (DoE, n.d.).&nbsp. It could be stored in small tanks placed below the ground surface and could store water when the rainwater beings in considerable volume. In addition to the storage systems, different types of recharge methods also could be adopted. This would result in significant improvement in the groundwater level in the neighborhood area and helps to conserve the resource. Different type of drainage systems is currently being promoted across the globe. The choice to be made must be suitable for the local need and the specifications proposed for long term utility of the product.&nbsp.