Answered You can hire a professional tutor to get the answer.
I will pay for the following article Design, Implement and Test a Timer. The work is to be 7 pages with three to five sources, with in-text citations and a reference page.
I will pay for the following article Design, Implement and Test a Timer. The work is to be 7 pages with three to five sources, with in-text citations and a reference page. The entire process is known as the linear process, where the level of the output signal is determined by the size of the signal. The design of the amplifiers has been advancing as time goes. Below are some of the different types of existing amplifiers. These types of amplifiers are categorized into different classes including.
This is a type of amplifier composed of output transistors conducting despite its signal waveform in the output, hence it’s the simplest amplifier of the audio. The frequency is low and used where the power supply is adequate.
The amplifier has both positive and negative transistors that use half of any signal available to conduct. The zero current is observed when the transistors replicate the input. The efficiency of Class B is higher than that of Class A due to these characteristics.
The type is as a result of the compromise between the two amplifiers that is the Class A and Class B. Class AB amplifiers join the quality of sound from Class A and the efficiency of Class B. in order to do the combination, the transistors biased of both amplifiers are made to conduct the close signal to zero.
The amplifier uses pulse with modulation in order to produce a signal of rail to rail. Their efficiency is high to about 90%. Their efficiency causes them to be modern portable such as smartphones among others. The examples of this amplifier include. MAX98304 and MAX984000.
The operation of this type of amplifier is similar to that of AB. The difference between the two is that Class G uses several supplies of power while AB uses one. It always amplifies maximum voltage. This Class is efficient than Class AB.
The drop across the stage of output is reduced in this class modulation of the supply of power. The class also does not require any supply of power. It uses multiple digital signals and analog signals that can be adjusted.
The input changes are slowed by the RC circuit on the input of the second gate of NOR. The output is not stable since it is connected to the input. The capacitors discharge tends towards zero. In other terms the capacitance in the capacitors used in this oscillator reduces. .
 .
