Answered You can hire a professional tutor to get the answer.
The UC has a metric designation of 310UC 118.
It is desired to support loads attached to a universal steel column (UC) by connecting a
universal steel beam (UB). The UC has a metric designation of 310UC 118. It is proposed
that a rectangular base plate (B) be welded to the flange of the UC by fillet welds on its upper
and lower edges as shown in Figure 1. Two gusset plates G1 & G2 are to be welded to the
base plate forming a T-joint. The UB can then be horizontally connected to the T-joint
gusset using four hexagonal bolts. At the end of the UB a semicircular lug is to be welded
along the centre line of the beam. Two cables need to be attached via a lug pin and support
the loads shown in Figure 1, where
