Write 3 pages with APA style on SMART criteria. The motion detectors shall be installed to sense whenever there seems to be activity in the room. This will avoid instances of switching on light in an

Write 3 pages with APA style on SMART criteria. The motion detectors shall be installed to sense whenever there seems to be activity in the room. This will avoid instances of switching on light in an empty room. Whenever there is motion in the room the switching system shall be in standby mode. Light detectors shall then be engaged when the level of light reduces which shall turn the lights on. Motion detectors shall be the primary switching control to put the switching system on standby mode. The motion detector shall be installed by using laser technology to enable sensory of even the smallest movements within a room (Fraden, 267). The light detectors will be the secondary switching level turning on the lights when low levels of light are detected in the occupied room. Measurability The progress of the project shall be based on the set timetable for the plan. Each step in the installation of the switching system shall be analyzed before going forward to the next step. The first step has been laid down as wiring the house. This will be done to ensure the circuit is well placed and in the desirable manner. This step is expected to consume the most time as it involves a lot of physical work. The goals of the plan shall be measured against the time laid down for the expected progress. The installation of the circuit should adhere to the installation standards (Linsley, 144). These include the wiring safety codes and the color codes used internationally. Other national standards shall also be applied in measuring the suitability of the installation of the systems. Comparing the setting of the switching system with the set standards shall provide a platform for measuring the conformity to standards. This will ensure that the end product not only works perfectly, but is also safe and conforms to set standards. Attainability The need to install the switching system arises from the desire to switch off unnecessary light. The aim of installing this new system will be to ensuring regulation in the amount of wasted energy. Providing a proper control to the usage of light shall immensely reduce the costs incurred from energy related bills. Evidence exists to show that this method can be able to save up to 25% of the energy consumption, reducing energy costs by a similar margin (Klaus D. John, 97). This regulation will occur by providing a system that allows for usage of light only when necessary. The number of lights left on overnight shall also be minimized by using this system. If an individual leaves a room without switching the lights off, the timer shall automatically switch the lights off. This occurs after motion detectors fail to detect any activity in the room. Excess lighting in the rooms shall also be reduced by the light sensors as they control the amount of light allowed into a room at any time. Realistic The proposed system provides an avenue for saving a lot of energy costs. This shall translate into reduced energy bills for the house. The installation of this system is viable as a way of relieving the owners of the house from the high costs of electricity and lighting. Achievement of this shall be through efficient management of the lighting by using switching system that is automated (Reed, 245). The system continues to be employed in many establishments like hotels, and desirable outcomes have been realized. If the same system is utilized within the scope of this house, similar results can also be realized.