-
I'm working on a environmental engineering project and need support to help me learn. Hello there,i have an assignment need to be done, i have 10 cases and i need help gathering them, i have attached
$10.00
Engineering
Waiting for answer
-
I need help with this homework plz
$20.00
Engineering
Waiting for answer
-
need help with parts E, F, G you may not have to physically build the circuit if you can do it in software I just really need help with this I have already done the rest of this problem but I'm just h
$10.00
Engineering
Waiting for answer
-
#1 Choose 5 different origin points and 5 different destination points. Calculate the milage between each.Assume that the charge per mile is $4.65 (for destinations under 100 miles)Assume that the cha
$10.00
Engineering
Waiting for answer
-
GIS assignment submission
$15.00
Engineering
Waiting for answer
-
The temperatures and pressure of atmospheric air are 20°C and 1 atm (101.325 kPa), respectively. If the adiabatic saturation temperature is 10°C, determine (1) the specific humidity, (2) the relative
$10.00
Engineering
Waiting for answer
-
Hi, This is my last assignment for the semester, unfortunately I got bad marks in pervious quizzes and assignments. This is my only option to cover up for pass grade. Please go through the note which
$20.00
Engineering
Waiting for answer
-
MATLAB: Numerical simulation of the dynamics of a cylindrical piston entering a coil. Various forces act such as gravity, the force of a spring, and the electrical force. Three different sources are
$10.00
Engineering
Waiting for answer
-
How does the author's culture influence the way she was able to develop Rinko's point of view? Use two details from the story to support your response. *Your answer SHORT RESPONCE
$10.00
Engineering
Waiting for answer
-
Hai, I am posting the work. This work is related to mechanical engineering and maintenance engineering subjects. In that work we have to use and GRANTAEDUPACK 2020 software and it was a problematic
$140.00
Engineering
Waiting for answer
-
Description of Problem The system dynamics for system similar to the above (SISO) are embedded in the attached file. You will use the file to generate input/output data, construct a Bode plot from
$10.00
Engineering
Waiting for answer
-
Hai, I am posting the work. This work is related to mechanical engineering and maintenance engineering subjects. In that work we have to use and GRANTAEDUPACK 2020 software and it was a problematic
$130.00
Engineering
Waiting for answer
-
Solve Question 1 (a) and (b)
$10.00
Engineering
Waiting for answer
-
It is a question about energy systems engineering and solar energy. I would be glad if you could help.
$10.00
Engineering
Waiting for answer
-
The grades of a group of 1000 students in an exam are normally distributed with a mean of 70 and a standard deviation of 10. A student from this group is selected randomly.
$10.00
Engineering
Waiting for answer
-
Need help with study guide
$75.00
Engineering
Answered
-
My question on the attached files
$10.00
Engineering
Waiting for answer
-
Hai, I am posting the work. This work is related to mechanical engineering and maintenance engineering subjects. In that work we have to use and GRANTAEDUPACK 2020 software and it was a problematic
$120.00
Engineering
Waiting for answer
-
Assignment question
$50.00
Engineering
Waiting for answer
-
Please answer the questions attached.
$10.00
Engineering
Waiting for answer
-
Build a miniALU using custom component of nandgame: The adder and subtractor have to be merged, using only 1 add16 gate. Use 2 compliments for subtraction a+not(b)+1 and put 1 to the carry bit of ad
$20.00
Engineering
Waiting for answer
-
civil engineering
$10.00
Engineering
Waiting for answer
-
To be solve analytically and using Matlab Coding software
$10.00
Engineering
Waiting for answer
-
file attached
$20.00
Engineering
Waiting for answer
-
file attached
$25.00
Engineering
Waiting for answer
-
file attached
$25.00
Engineering
Waiting for answer
-
A 5000 kVA, 12000/30000 V single-phase transformer draws 15 kW and 12 A when idling and has short-circuit parameters ZccL = 1.25 Ω and RccL = 0.125 Ω. Decide: to. Rsc, Xsc and Rfe parameters of the eq
$10.00
Engineering
Waiting for answer
-
DIgital ELectronics Assignment
$50.00
Engineering
Waiting for answer
-
Help me solve the question that he is in the picture
$10.00
Engineering
Waiting for answer
-
Hello, I need this project done
$400.00
Engineering
Waiting for answer
-
Humber CollegeMECH 212 undefined This is graphic and analytical assignment. You will work on 2 common types of mechanism, a four bar linkage and a slider. The kinematic diagram is given. You must use
$20.00
Engineering
Waiting for answer
-
My name is Yagnik Vadi so my question is 35 in both table.
$20.00
Engineering
Waiting for answer
-
Determine the points of discontinuity and classify them . Give the equation of the vertical and horizontal asymptotes if they exist . Define the function at the point where there is removable discon
$10.00
Engineering
Waiting for answer
-
From each example, do the following: (a) Determine the degrees of freedom, (b) identify whether it is mechanisms, structures or preloaded structure, (c) Classify the links (d) Classify the kinematic p
$10.00
Engineering
Waiting for answer
-
Extend the 2D CRLB for RSS-based localization to 3D scenarios. Name an application where the 3D bounds help.
$20.00
Engineering
Waiting for answer
-
I need help with my study guide
$100.00
Engineering
Answered
-
Determine the value of (f/f_c) at which the attenuation constant due to conductor losses in an a x b rectangular waveguide for the TE10 mode is a minimum. Determine the same for the TM11 mode is a mi
$10.00
Engineering
Waiting for answer
-
Could someone please answer these physics question for me? You must have an understanding of deflection , deformation and the Principles of Work. Please read the questions carefully and make sure you
$25.00
Engineering
Waiting for answer
-
Lab about basic elements and Kirchoff's law, fill in as much as possible (you may skip the lab data part). Price can be discussed
$35.00
Engineering
Waiting for answer
-
Lab about basic elements and Kirchoff's law, fill in as much as possible (you may skip the lab data part). Price can be discussed
$10.00
Engineering
Waiting for answer
-
Electrocomp's management realizes that it forgot to include two critical constraints. In particular, management decides that there should be a minimum number of air conditioners produced in order to f
$10.00
Engineering
Waiting for answer
-
39 are the last digits
$10.00
Engineering
Waiting for answer
-
Can you create plc logic from a grafcet chart?
$40.00
Engineering
Waiting for answer
-
What is the aircraft portfolio??
$24.00
Engineering
Waiting for answer
-
Prepare a comprehensive quantity and cost estimate for a small commercial project
$100.00
Engineering
Waiting for answer
-
need help with this lab. the questions are attached
$25.00
Engineering
Waiting for answer
-
If a PDI-100 transducer has a range of -200kPa to 200kPa with a 4-20 milliamp output that is wired to a 0-20 milliamp input on a 16 bit A/D converter (0-65536 counts) on a PLC, how many counts would b
$20.00
Engineering
Waiting for answer
-
Open book quiz 40 questions multiple choice
$30.00
Engineering
Waiting for answer
-
I have an open book exam 40 multiple choice questions
$30.00
Engineering
Waiting for answer
-
Development of a Project Cost Estimate Problem Statement and deliverables- Prepare a comprehensive quantity and cost estimate for a small commercial project (Drawings are attached). The estimate sho
$120.00
Engineering
Waiting for answer
