-
Matlab and Simulink
$30.00
Engineering
Waiting for answer
-
Using Matlab and Simulink
$15.00
Engineering
Waiting for answer
-
PQRS is a four bar chain with link PS fixed. The lengths of the links are PQ = 62.5 mm ; QR = 175 mm ; RS = 112.5 mm ; and PS = 200 mm. The crank PQ rotates at ω rad/s clockwise. Draw the velocity and
$10.00
Engineering
Waiting for answer
-
PERSONAL ETHICS PHILOSOPHY PRESENTATION ASSIGNMENT INSTRUCTIONS OVERVIEW The aim of the Personal Ethics Philosophy Presentation Assignment is to practice and demonstrate effective oral communication
$10.00
Engineering
Answered
-
APPLIED ETHICS MINI CASE STUDY ASSIGNMENT INSTRUCTIONS OVERVIEW There are four Applied Ethics Mini Case Study Assignments. In each Applied Ethics Mini Case Study, write your thoughts and reflections
$10.00
Engineering
Answered
-
PERSONAL ETHICS PHILOSOPHY PAPER ASSIGNMENT INSTRUCTIONS OVERVIEW The aim of the Personal Ethics Philosophy Paper Assignment is to synthesize the ethics theories, concepts, and applications you have
$10.00
Engineering
Answered
-
Hello , I need help doing a homework using MATLAB, it's about facial recognition with principal-component analysis. Not very advanced
$50.00
Engineering
Waiting for answer
-
The following table gives the measured lengths and bearings for the courses of a closed traverse a to f, as shown in the following figure, together with the departures and the latitudes of the known s
$10.00
Engineering
Waiting for answer
-
There are two problems that need to be solved. First, the diffusion equation needs to be solved analytically using given parameters. Then, a MATLAB code needs to be created using the Euler Explicit me
$25.00
Engineering
Waiting for answer
-
Write discussion thread For this mini case study, refer to the textbook readings and the article: Hart, S. M. (2013). The Crash of Cougar Flight 491: A Case Study of Offshore Safety and Corporate Soci
$10.00
Engineering
Answered
-
hi I want a MatLab code that simulates BPSK modulation technique with the effect of ISI intersymbol interface (BER vs eb/n0)
$40.00
Engineering
Waiting for answer
-
I need the solutions
$80.00
Engineering
Waiting for answer
-
Read each thread and apply with 250 words minimum. Thread 1 “The shadow is a moral problem that challenges the whole ego-personality, for no one can become conscious of the shadow without considerable
$10.00
Engineering
Answered
-
Ethics Theories Matrix: Wilkens Chapters 4 — 5 Assignment ETHICS THEORIES MATRIX ASSIGNMENT INSTRUCTIONS OVERVIEW The aim of the Ethics Theories Matrix Assignment is to summarize for study, reflection
$10.00
Engineering
Answered
-
DISCUSSION ASSIGNMENT INSTRUCTIONS Write your thread in APA format using a title page and reference list. Include APA citations in the text and a reference list at the end as appropriate. Each thread
$10.00
Engineering
Waiting for answer
-
DISCUSSION ASSIGNMENT INSTRUCTIONS Write your thread in APA format using a title page and reference list. Include APA citations in the text and a reference list at the end as appropriate. Each thre
$10.00
Engineering
Answered
-
Computational Fluid Dynamics Quesion Please I need a full solution to the question attached
$10.00
Engineering
Waiting for answer
-
Ethics Theories Matrix: Wilkens Chapters 2 — 3 Assignment ETHICS THEORIES MATRIX ASSIGNMENT INSTRUCTIONS The aim of the Ethics Theories Matrix Assignment is to summarize for study, reflection, and cri
$10.00
Engineering
Answered
-
Ethics Theories Matrix: Wilkens Chapters 2 — 3 Assignment ETHICS THEORIES MATRIX ASSIGNMENT INSTRUCTIONS The aim of the Ethics Theories Matrix Assignment is to summarize for study, reflection, and cr
$10.00
Engineering
Waiting for answer
-
APPLIED ETHICS MINI CASE STUDY ASSIGNMENT I OVERVIEW There are four Applied Ethics Mini Case Study Assignments. In each Applied Ethics Mini Case Study, write your thoughts and reflections in the form
$10.00
Engineering
Answered
-
ETHICS THEORIES MATRIX ASSIGNMENT INSTRUCTIONS OVERVIEW The aim of the Ethics Theories Matrix Assignment is to summarize for study, reflection, and critical analysis the ethics theories in the book B
$10.00
Engineering
Waiting for answer
-
APPLIED ETHICS MINI CASE STUDY ASSIGNMENT INSTRUCTIONS OVERVIEWThere are four Applied Ethics Mini Case Study Assignments. In each Applied Ethics Mini Case Study, write your thoughts and reflections i
$10.00
Engineering
Waiting for answer
-
APPLIED ETHICS MINI CASE STUDY ASSIGNMENT INSTRUCTIONS OVERVIEW There are four Applied Ethics Mini Case Study Assignments. In each Applied Ethics Mini Case Study, write your thoughts and reflection
$10.00
Engineering
Waiting for answer
-
APPLIED ETHICS MINI CASE STUDY ASSIGNMENT OVERVIEW There are four Applied Ethics Mini Case Study Assignments. In each Applied Ethics Mini Case Study, write your thoughts and reflections in the form o
$10.00
Engineering
Answered
-
1. determine the capacity of the details shown below. A992: Fy=50ksi, Fu=65ksi A36: Fy=36ksi, Fu=58ksi effective bolt hole diameter = bolt hole + 1/16" beam properties: tw=0.38 in., bf=7.07 in., tf=0.
$10.00
Engineering
Waiting for answer
-
Who is the best choice of peer debriefer for the CISM process, and why
$10.00
Engineering
Waiting for answer
-
Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes;
$40.00
Engineering
Waiting for answer
-
Make Presentation by using my paper Presentation Instruction Create a summative PowerPoint presentation on your completed final paper.You can summarize the content of each of your Level 1 headings (no
$10.00
Engineering
Answered
-
can you help me with this?
$10.00
Engineering
Waiting for answer
-
Write journal reflection Topic: What would be some leadership goals to continue to hone after you get out of this course? What are some practical ways in which you can be intentional about growing yo
$10.00
Engineering
Answered
-
Research Project Requirements: The reason for this project is to learn how to make and analyze Lean Six Sigma Projects. Students are not expected to prepare a perfect Lean Six Sigma Project, but they
$15.00
Engineering
Answered
-
Project Guidelines: Purpose: This project, to be completed as an individual, will provide you with an opportunity to apply and understand basics of the Lean and Lean Six Sigma methodology to investiga
$15.00
Engineering
Waiting for answer
-
Read Paper and fill the critique sheet Link for the Critique sheet format: https://www.mediafire.com/file/g2ael2mm6qruszv/Critique_Sheet_-_AVIA_491.docx/file Link for the paper: https://www.mediafire.
$10.00
Engineering
Answered
-
Revise my paper. Here is link for my paper. https://www.mediafire.com/file/wsqy9jo7u7us5d0/Draft_Research_Paper_%25231.docx/file Here is screen shot for feed back and what and how should you revise my
$10.00
Engineering
Answered
-
Revise my paper. Here is link for my paper. https://www.mediafire.com/file/wsqy9jo7u7us5d0/Draft_Research_Paper_%25231.docx/file Here is screen shot for feed back and what and how should you revise
$10.00
Engineering
Waiting for answer
-
Topic: Necessity to Fatigue Management Systems for Aviation Maintenance Mechanics For Literature Review papers, be sure to include the following sections: Title PageAbstractIntroductionBackground (Lit
$10.00
Engineering
Waiting for answer
-
Here is my first draft of the paper. Revise it and should complete and follow all the instruction and following section. It looks like my first draft paper needs editing. Please make corrections to m
$10.00
Engineering
Waiting for answer
-
Here is my first draft of the paper. Revise it and should complete and follow all the instruction and following section. Link https://www.mediafire.com/file/wsqy9jo7u7us5d0/Draft_Research_Paper_%25231
$10.00
Engineering
Waiting for answer
-
Here is my first draft of the paper. Revise it and should complete and follow all the instruction and following section. Link https://www.mediafire.com/file/wsqy9jo7u7us5d0/Draft_Research_Paper_%25231
$10.00
Engineering
Waiting for answer
-
Read this accident report and fill the 2. Analysis part. https://www.mediafire.com/file/kelx5q00dfowl08/Accident_Report_%25281%2529.docx/file
$10.00
Engineering
Answered
-
Here is my first draft of the paper. Revise it and should complete and follow all the instruction and following section. Link https://www.mediafire.com/file/wsqy9jo7u7us5d0/Draft_Research_Paper_%25231
$10.00
Engineering
Waiting for answer
-
Overview: You will write two drafts of your research paper which lead to the Final Paper for the course. Each of these writing assignments provides opportunities for feedback.The first draft you will
$10.00
Engineering
Waiting for answer
-
Read this accident report and fill the 2. Analysis part. https://www.mediafire.com/file/kelx5q00dfowl08/Accident_Report_%25281%2529.docx/file
$10.00
Engineering
Waiting for answer
-
Overview: You will write two drafts of your research paper which lead to the Final Paper for the course. Each of these writing assignments provides opportunities for feedback.The first draft you will
$10.00
Engineering
Waiting for answer
-
Read this accident report and fill the 2. Analysis part. https://www.mediafire.com/file/kelx5q00dfowl08/Accident_Report_%25281%2529.docx/file
$10.00
Engineering
Waiting for answer
-
Overview: You will write two drafts of your research paper which lead to the Final Paper for the course. Each of these writing assignments provides opportunities for feedback.The first draft you will
$10.00
Engineering
Waiting for answer
-
Read this accident report and fill the 2. Analysis part. https://www.mediafire.com/file/kelx5q00dfowl08/Accident_Report_%25281%2529.docx/file
$10.00
Engineering
Waiting for answer
-
Overview: You will write two drafts of your research paper which lead to the Final Paper for the course. Each of these writing assignments provides opportunities for feedback.The first draft you will
$10.00
Engineering
Waiting for answer
-
9. Tolerances for a bicycle derailleur are 6 cm +/− .001 cm. The current process produces derailleurs with a mean of 6.0001 with a population standard deviation of .0004. The process population is nor
$10.00
Engineering
Waiting for answer
-
I need help with a civil engineering question. University level question. All the information you need is on the attached file and every tasks need to be done are highlighted on page 5. If software a
$100.00
Engineering
Waiting for answer
