Answered You can buy a ready-made answer or pick a professional tutor to order an original one.
STRAYER BUS430 WEEK 6 QUIZ 5 LATEST 2016 JANUARY
Question 1
3 out of 3 points
The determination of specific job tasks and responsibilities is called ____.
a. Job design
b. Ergonomics
c. Job enlargement
d. Job enrichment
Question 2
3 out of 3 points
A ____ layout consists of a functional grouping of equipment or activities that do similar work.
a. Product
b. Process
c. Cellular
d. Fixed position
Question 3
3 out of 3 points
Which of the following is not a common approach for designing process layouts?
a. CRAFT
b. ALDEP
c. NIOSH
d. CORELAP
Question 4
0 out of 3 points
Which type of layout is best for high volumes of demand with few if any setups/changeovers?
a. Product
b. Process
c. Cellular
d. Fixed position
Question 5
3 out of 3 points
A(n) ____ performs entire jobs rather than specialized, assembly line work.
a. Virtual team
b. Self-managed team
c. Natural work team
d. Ergonomic team
Question 6
3 out of 3 points
For a given cycle time in line balancing, assembly-line efficiency can be increased by
a. Speeding the line
b. Slowing the line
c. Decreasing the number of work stations
d. Increasing the number of work stations
Question 7
3 out of 3 points
Assembly line balancing
a. Is a one-time activity.
b. Tries to minimize the production rate for a given number of work stations.
c. Tries to minimize the number of work stations for a given production rate.
d. Attempts to load work into early work stations.
Question 8
3 out of 3 points
Which one of the following fits best with process layout?
a. Skilled workers
b. Standardization
c. Specialized equipment
d. Little work-in-process inventories
Question 9
3 out of 3 points
All of the following are common objectives of layout studies except
a. Minimize delays in materials handling and customer movement
b. Minimize the number of workstations
c. Provide for good housekeeping and maintenance
d. Maintain flexibility
Question 10
3 out of 3 points
____ is vertical expansion of job duties to give the worker more responsibility.
a. Job enlargement
b. Job rotation
c. Job enrichment
d. Job design
Question 11
3 out of 3 points
The production of large goods such as airplanes is best accomplished using a ____ layout.
a. product
b. process
c. Cellular
d. Fixed position
Question 12
3 out of 3 points
An assembly line with 28 activities is to be balanced. The total amount of time required for all 28 activities is 39 minutes. The line will operate for 450 minutes per day. What must the cycle time be to achieve an output rate of 400 units/day?
a. 1.39 minutes
b. 11.54 minutes
c. 1.125 minutes
d. 0.89 minutes
Question 13
3 out of 3 points
____ set their own goals and inspect their own work, often hire their own replacements and prepare their own budgets.
a. Virtual teams
b. Enlarged teams
c. Socio-technical teams
d. Self-managed teams
Question 14
3 out of 3 points
The typical layout of facilities in a hospital would be an example of a ____ layout.
a. product
b. process
c. Cellular
d. Fixed position
Question 15
3 out of 3 points
A ____ layout is an arrangement based on the sequence of operations that are performed during the manufacturing of a good or the delivery of a service.
a. product
b. process
c. Cellular
d. Fixed position
Question 16
3 out of 3 points
Factors such as managers' preferences, services and taxes, available transportation systems, banking services and environmental impacts would be most closely related to which level of the facility location hierarchy?
a. Global (National) location
b. Regional location
c. District or community location
d. Local site selection
Question 17
3 out of 3 points
The weights typically used in the center-of-gravity method are
a. Transportation costs
b. Distances
c. Volumes of goods
d. Times
Question 18
3 out of 3 points
The Supply Chain Operations Reference (SCOR) Model function that entails procuring goods and services to meet planned or actual demand is called ____.
a. Plan
b. Source
c. Make
d. Deliver
Question 19
3 out of 3 points
The Supply Chain Operations Reference (SCOR) Model function that entails all order management activities from processing customer orders to routing shipments, managing goods at distribution centers and invoicing the customer is called ____.
a. Return
b. Source
c. Make
d. Deliver
Question 20
3 out of 3 points
Which of the following is not a basic function of the Supply Chain Operations Reference (SCOR) model?
a. source
b. make
c. deliver
d. control
Question 21
3 out of 3 points
The metric "perfect order fulfillment" is often used to measure ____.
a. Delivery reliability
b. Responsiveness
c. Supply chain efficiency
d. Supply chain financial performance
Question 22
3 out of 3 points
Which one of the following is not directly related to a supply chain?
a. Distribution center
b. Inventory
c. Promotion/Advertising
d. Supplier
Question 23
3 out of 3 points
A(n) ____ seeks to balance capacity and demand, might use only a few large distribution centers, and minimize costs of routing products from factories to retail stores and customers.
a. Responsive supply chain
b. Efficient supply chain
c. Push system
d. Pull system
Question 24
3 out of 3 points
A firm that specializes in certain types of goods-producing activities, such as customized design, manufacturing, assembly, and packaging, and works for end users is called a ____.
a. Responsive supply chain
b. Contract manufacturer
c. Distribution center
d. Vendor-managed inventory supplier
Question 25
3 out of 3 points
A contract manufacturer can offer significant competitive advantages. Which one of the following is not an advantage of using a contract manufacturer?
a. Access to advanced manufacturing technologies
b. Faster product time-to-market
c. Lower costs from economies of scale
d. Standardized design
Question 26
3 out of 3 points
A push system
a. can adjust easily to poor forecasts
b. is more appropriate for make-to-order items
c. can reduce transportation costs by using full-truckload shipments
d. works best with variable sales patterns
Question 27
3 out of 3 points
The point in the supply chain that separates the push system from the pull system is called the
a. Reversal point
b. Push-pull boundary
c. Postponement site
d. Center of gravity
Question 28
3 out of 3 points
The center-of-gravity method takes all the following into account except
a. Location of facilities and markets
b. Demand
c. Transportation costs
d. Service objectives
Question 29
3 out of 3 points
Managing the flow of goods and materials from the customer backward through the supply chain is called
a. Reverse Logistics
b. The Pull System
c. The Push System
d. Response Management
Question 30
3 out of 3 points
____ is the process of delaying product customization until the product is closer to the customer at the end of a supply chain.
a. Postponement
b. Sourcing
c. Deferral
d. Multisite management
- @
- 177 orders completed
- ANSWER
-
Tutor has posted answer for $18.00. See answer's preview
******** **
*
out ** 3 ******* ***
determination
of ******** *** ***** *** responsibilities ** ****** ***** * ***
*******
* *********** *
***
************ *
Job
*********** Question **
*
*** ** 3
*******
* ****
******
******** of * ********** ********
**
********* or ********** **** ** ******* ***** * ******** b ******** * Cellular * ***** *********
********
** *
***
** *
*******
Which of
***
********* ** not
a
common ********
for
********* ******* layouts? a ******
*
ALDEP * NIOSH d ******** ******** ** out ** * ******* ***** ****
of
****** **
best
for ****
volumes
** demand
****
*** if
any
******************** a
********
* Process * Cellular
*
***** ********* ******** ** 3 *** ** 3 ******* **** ____ ******** ****** jobs ****** ****
***********
******** ****
*****
a *******
*****
* ************
team
* Natural work
*****
d *********
*****
******** 6 * *** **
*
******* *** * ***** ***** time ** line ********* assembly-line **********
***
** ********* by
*
Speeding *** *****
*
Slowing the line c
**********
*** number **
****
********* *
**********
the number ** **** *********
********
** * *** ** * ******* ******** **** ********** * Is * ******** *********
b
***** to minimize ***
**********
**** for * *****
******
** **** ********* * Tries to ********
the
number of work stations *** a *****
**********
rate *
Attempts
** **** **** **** early
****
********* ******** **
*
out ** 3 points Which
***
** *** ********* fits best **** ******* layout? * ******* ******** * Standardization *
***********
********** d ****** *************** inventories ******** 9 * *** ** * ******* All of
***
********* *** ****** ********** ** layout ******* ******* a
********
****** in
materials
******** *** ******** ********* b
Minimize
*** number ** ************* * Provide *** **** ************ ***
************
* ******** ************
Question
*** *
out
** * *******
****
** ******** expansion **
***
****** to
****
the worker more responsibility *
***
************ * *** ********* c *** *********** * *** ******* ********
11
* *** ** * points The ********** ** *****
*****
**** ** ********* is best ************
using
a **** ******* * ******** * ********
*
Cellular * *****
position
Question 12
3
out ** * ******* **
assembly
line **** 28 activities is to ** ******** The ***** amount of ****
********
*** *** **
**********
** 39 minutes
***
**** **** *******
for
*** minutes per
day
**** ****
***
***** time ** ** *******
an
****** **** ** *** units/day? * *** ******** b **** ******** * **** ******** *
089
******** Question
***
3 ***
**
* *******
****
set their ***
*****
*** inspect
*****
own work often **** *****
own
************ *** ******* ***** *** ******** * ******* teams * ******** ****** * *************** teams * Self-managed teams ******** 14 * *** of 3 ******* *** ******* ****** of ********** in * ******** ***** ** ** ******* ** a ____ ******* * product * process *
Cellular
* ***** position
Question
*** 3 ***
**
3 ******* *
****
****** is **
***********
based on
***
******** of ********** that ***
performed
****** *** manufacturing ** * **** ** the delivery ** * service a ******** b ******** * ********* * Fixed
position
******** *** *
***
** 3 *******
*******
**** ** *************
***********
******** *** *****
*********
************** *******
banking
services *** ************* impacts *****
be
**** ******* ******* to ***** ***** ** *** facility location *********** * Global ********** ********* b
********
********* *
********
** *********
*********
* *****
****
********** Question ***
*
*** of
*
******* *** weights ********* ****
**
the center-of-gravity ****** are a Transportation costs b ********** * ******* ** goods * Times ******** *** * *** ** * points The ****** ***** Operations *********
******
Model ********
****
******* procuring
*****
*** services
**
**** ******* or
******
demand **
******
____ * ***** * Source
*
***** * ******** ******** 19 * *** ** 3 ******* *** ****** ***** ********** ********* ****** ***** ******** **** entails all order management activities **** processing ******** ****** to
*******
********* managing goods at
distribution
******* and *********
the
******** ** ****** ***** a
*******
* ******* c *****
*
******** Question
20
* out ** * points
*****
of *** ********* is *** * ***** ******** **
***
Supply ***** **********
*********
****** *******
a
source * ***** c
********
d ********
********
*** 3
***
** * ******* *** ******
*************
***** ***************** ** ***** **** ** ******* ***** * Delivery ************ * Responsiveness * ****** ***** *********** * ****** ***** ********* ************ Question
***
* out
of
* points
*****
*** **
the
********* **
***
******** related
**
* ****** chain? * ************
center
* ********** * ********************** * ********* ******** 23 * *** ** * ******* **** **** ***** ** ******* ******** *** ****** ***** use only * few ***** ************ ******* *** minimize costs **
routing
******** ****
factories
** ******
******
and customers
*
Responsive supply
chain
* *********
******
****** * **** ******* d
Pull
******* Question *** * out ** * points A firm **** *********** in ******* ***** ** goods-producing
**********
**** **
customized
****** manufacturing
********
*** *********
***
works ***
***
users **
******
* ***** * ********** ******
******
b Contract ************* * Distribution ******* d ************** ********* ********* ********
***
3 out of
* points
* contract ************ can
***** significant *********** ********** *****
one
** ***
*********
** *** ** ********* **
*****
* ******** ************** * ****** ** ******** ************* ************* * ****** ******* ***************
*
Lower costs ****
********* **
scale *
Standardized *******
Question
*** *
***
of * ******* * push
system
a *** ****** ****** ** poor ********** * ** **** *********** *** ************* items * can reduce ************** costs ** using ************** ********** d ***** **** **** ******** *****
patterns
******** *** 3 out
** * points The
***** ** the
****** ***** that
*********
*** push
******
**** *** **** ****** **
******
the * Reversal ****** * ********* boundary c ************ site * Center ** ******** ******** *** * *** ** 3 ******* *** center-of-gravity ****** ***** *** the
*********
**** ******* except *
Location ** **********
*** markets *
******* c ************** ******
*
******* ***********
Question
29 * *** ** *
*******
Managing *** **** ** goods *** ********* from the customer ******** through *** ****** ***** is ******* * ******* ********** * ***
Pull
System * The Push System d
******** *********** ******** ***
* *** ** * points **** is
the process **
********
product *************
*****
*** ******* is ****** to
***
******** ** ***
end
of * ****** ****** * ************* *
********* * ********* * ********* **********