Compose a 1000 words essay on Inorgnic Synthesis. Needs to be plagiarism free!Test for SO42- required use of BaCl2 whereby the resulting component was a precipitate of BaSO42- whereas that of Al3+ yie

Compose a 1000 words essay on Inorgnic Synthesis. Needs to be plagiarism free!

Test for SO42- required use of BaCl2 whereby the resulting component was a precipitate of BaSO42- whereas that of Al3+ yielded to a cloudy precipitate by adding KOH and disappearing in excess.

During the experiment, the first step was to cut aluminum foil into small pieces, hence increase their surface area for effective and quick reaction. Afterwards, the prepared pieces of aluminum foils were put in a beaker having a capacity if 150 ml and its weight taken before they were put in a 250 ml whose weight together with its contents was 1104.7g. Then the rest of the experiment was transferred to the fume hood to void inhaling of obnoxious gases while reactions were in progress. 13 ml of 3M KOH were added in the 250 ml beaker coupled with stirring continuously to ensure all the aluminum pieces were completely dissolved. Observations made during this process encompassed bubbling reaction, black color and elevation of the contents’ temperature above the room’s ordinary. Upon completion of the entire reaction process, the contents were cooled to room temperature whereby the involved chemical equation was as follows,

The cooled contents were then filtered using glass wool. This is by putting glass wool in a funnel and in 100 ml beaker whereby based on the resulting filtrate’s clearance one could do another filtration to ensure clearer resultant. There was rinsing of the glass wool (using 2 ml of hot water) before allowing resulting filtrate to cool and addition of 22 ml of 4M H2SO4. On adding of 23 ml of 4M H2SO4, the filtrate stated to change its appearance from black color to colorless before becoming dense near the bottom of the beaker. This was a precipitate while the reaction equation that took place encompassed,

After the above reaction, the resultant was heat on a hot plate (5-10 minutes) to vaporize excess liquid to approximately 25 ml then testing