Answered You can hire a professional tutor to get the answer.
The figure below shows a bevel gear reducer driven by an 1800 rpm motor producing 36N-m of torque. The output drives a pump operating at 600 rpm load....
The figure below shows a bevel gear reducer driven by an 1800 rpm motor producing 36N-m of torque. The output drives a pump operating at 600 rpm load. The gear housing is mounted at the locations labeled A, B, C, and D in the figure. If the combined housing and gear assembly has a mass of 50 kg with a center of gravity located at the geometric center of the gear housing and assuming an efficiency of 100%, determine the reaction forces at each of the mounting locations (A-D).
g= 9.81
looks like a square with the following labeling
a to b 100mm ( toward load)
c to d 100mm (toward motor)
600 rpm attaches to load to front of square
1800 rpm attaches to motor to left side of square
Where do I start???
